Tagetes minuta on cotton, tencel and wool

Aluminium acetate

This was the first time I’d used aluminium acetate as a mordant. My attempt to use aluminium sulphate and washing soda wasn’t a success, so on to the smelly stuff…

There was plenty of dyestuff to harvest as the Tagetes minuta had grown abundant; not bushy, but taller than ever, to around three metres. This allowed for a double experiment on cotton and wool, as well as yielding plenty to dry for later use.

Some sources state that aluminium acetate on cellulose only needs a temperature of 55oC to work, but I decided to follow the directions in Jenny Dean’s Wild Colour: to simmer a 5% WoF solution for an hour, then leave overnight before rinsing well. The dyestuff was simmered for about 45 mins., then strained and the cotton yarn added. I wasn’t too concerned with exact weights when it came to the plant material – that’s for another time.

cottonyarnThe yarn was left to cool in the liquor overnight, then rinsed well. A smaller sample was cut off and washed in cheap washing-up liquid. Although some colour came out in the water, there is no difference in the two samples to the naked eye.¬†An unmordanted sample of cotton was added to the original dyebath, but came out the palest yellow (the sample has since vanished…).

Next came the tencel: 20/2. Why 20/2? Because I wastencel put off a while ago by weaving with hand-dyed (fibre reactive) 10/2 that broke a few times. I intend to use it in the future, but in the meantime it’ll be used for dye experiments while I save the 8/2 for weaving for weaving’s sake. The shade obtained was lighter than the cotton; I thought that it may have come out deeper, considering how well tencel takes up fibre reactive dyes, then was reminded that a another experiment gave cotton and tencel an equal footing in this respect.woolyarn

As the previous experiment on wool was basic, I decided to extend the game. The examples show how the alum/CoT mordant (left) brings out the deeper shades. Top-to-bottom: an alkaline modifier darkens them, acid lightens them and iron “saddens” them – classic textbook stuff.